Azuma Kako Co. Ltd was established in Tokyo Japan in 1935 and from being a car engine repair specialist, Azuma later on shifted its field and became well known for engine components welding repair.

Azuma is known as specialist for engine components welding repair and is renowned for helping ocean-farer vessels to recondition and repair damaged engine components.

This Japanese company soon expanded its network and marks the start of it's workshops in Taiwan, Singapore, China and Malaysia.

Through the years, Azuma Group is dedicated to maintain its competencies and expertise in order to address the diverse needs of its clients. We've been in the marine component reconditioning business for many years and continuously receiving authorizations from Engine Makers.

Azuma Engineering (S) Pte Ltd is a subsidiary of Azuma Kako., Ltd. (Japan). It was incorporated on 19 February 1990 and was built mainly for reconditioning of engine components (Piston crown, Cylinder Cover, Exhaust Valves Housing, Spindle and Seat, Piston Rod, Piston Skirt, Fuel Injection Parts, etc.) and authorized by most of the Japanese Engine Makers (Mitsubishi, Akasaka, Hanshin, Kawasaki, Mitsui, Kobe Diesel, Hitachi Zosen, Makita, IMEX and Diesel United).

Our company is committed to achieve professional excellence in fulfilling customers' satisfaction and expectations. It aims to carry out the responsibilities and obligations thru fast and prompt response and give customers fresh information and techniques as approved by engine makers.

AZUMA MARINE & OFFSHORE ENGINEERING (M) SDN. BHD. was incorporated in June 2013 and fully owned by Azuma Singapore. AMOE is Azuma Singapore's subsidiary company and will focus on the reconditioning of marine engine components and specialized in welding/machining jobs for oil and gas industries.

Azuma Engineering (Shanghai) Co.,Ltd. established in 2013 as a joint venture and since 2014 operating independently as a subsidiary company of Azuma Kako Ltd. (Japan).

From our workshop in Shanghai we can provide all reconditioning services for main- and auxiliary engine components. Also we are specialized in the reconditioning of hydraulic cylinders/jacks and overhauling of grabs.

QUALITY POLICY

Azuma Engineering (S) Pte Ltd / Azuma Marine & Offshore Engineering / Azuma Engineering (Shanghai) shall provide all product and services which shall conform with customer stringent requirement and expectation and; to continually improve the effectiveness of the Quality Management System.

 

Top Management shall ensure that this policy:

  • Is appropriate to the purpose of the organization;
  • Includes a commitment to meeting requirements and to continual improvements appropriate to the purpose of the organization;
  • Provides a framework for establishing and reviewing quality objectives;
  • Is understood, implemented and maintained at all levels of the organization;
  • Is reviewed and approved for continuing suitability;
  • Continual improvement on health, safety and environmental performance.

QUALITY OBJECTIVES

Keeping in view, measurable and consistent with quality policy including the commitment to continual improvement, the Quality Objective(s) will be set in Annual Management Review and it will be reviewed in the following year for its performance and achievement. Management review committee, based on its achievement, will take appropriate measures to improve its performance or if satisfied quality objective(s) can be set for other relevant functions and/or levels within the organization. (e.g. overall product quality target is 95%); to measure this the following formula can be used:

 

MARINE SERVICES

RECONDITIONING OF MARINE ENGINE COMPONENTS

PISTON CROWN

  • Specialized in submerged Arc welding on Piston Crown Ring Grooves and Combustion surface
  • Restandardize Ring Grooves by Chrome Plating
  • Machining and Grinding Services

CYLINDER COVER

  • Specialized in welding and machining of Cylinder Covers
  • Overhailing of Cylinder Heads

EXHAUST VALVE SPINDLE AND SEAT

  • PTA and MIG Welding on Seat Surface
  • Chome Plating of Exhaust Valve spindle stem surface
  • Resleeving on Gas Passage

AUXILLIARY ENGINE PISTON HEAD

  • Restandardize Ring Grooves by Chrome Plating
  • Defric Coating

AUXILLIARY ENGINE CONNECTING RODS

  • Serration Lapping
  • Alignment Check and Big End Boring

AIR COMPRESSOR CYLINDER BLOCK

  • Reconditioning of Air Compressor Cylinder Blocks by inserting new sleeve

RECONDITIONING OF FUEL OIL COMPONENTS

  • Specialize in the overhaul and repair of fuel equipment and components
  • Rebuilding and restoring the components to their original condition
  • Fuel Pump
  • Fuel Injector
  • Spindle and Guide (Conventional & Slide Valve type)
  • Suction Valve
  • Puncture Valve
  • Nozzles
  • Circulating Valves
  • Delivery Valves
  • Plunger & Barrel
  • SIP Valve
  • Lubricator (Alpha/Cylinder)

EXCHANGE SERVICE

  • xchange items ready in Azuma stock pool to supply and charged as reconditioning cost
  • Ready stock - saves reconditioning time and process

Onboard Services

AZUMA Group specialised in Marine Diesel Engine Services such us overhaul and repair.
We can provide manpower (experienced service Engineers and Technicians) to attend onboard and aux engine overhauling.

Onboard overhauling consist of following jobs:

  1. Exchange all cyl heads.
  2. Piston's inspection and piston ring renewal
  3. Liner's honing and seal's renewal
  4. Main Bearings renewal.
  5. Camshaft damper renewal
  6. HPFP renewal
  7. Injector valves renewal
  8. Me must be tested after overhaul
  9. Timing Check and attend sea trial

 

AZUMA ENGINEERING SINGAPORE PTE LTD one of the companies operating in Singapore, Singapore, known for its high-quality services.

Its services fall under the following categories: Repairs & Maintenance, Engine, Hull & Machinery Repairs and Maintenance, Marine Engineering, General Manufacturers & Dealers, Marine Equipments, Ship & Boats Repairs and Maintenance, Spare Parts.

The company’s information has been entered into the United Arab Emirates Directory records due to the importance of the services it provides.

We can infer the activities of this company with the following keywords: ACME, auxiliary engine, azuma, Azuma engineering, Azuma Engineering Singapore pte ltd, Cylinder Cover, Exhaust Valves Housing, Fuel Injection Parts, Main engine, manpower, Onboard, Piston Crown, Piston Rod, Piston Skirt, reconditioning, Spindle Seat, suppliers.

Its information will be updated soon, as we follow a periodic plan to update company data. If you have any updated information about this company, please don’t hesitate to send us via the Data Correction form in this page.